Milliput Terracotta (4oz) Pack Two Part Epoxy Putty Modeling Supplies Ceramics

Description

Milliput -  Terracotta
Summary: One package of two part epoxy putty.
The epoxy putty with a thousand uses in modelling D.I.Y and industry.
Milliput is the trade name for their epoxy putty. They produce five grades: Standard Yellow/Grey, Silver Grey, Superfine White, Terracotta, and the latest addition - Milliput Black. Each grade is presented in similar packs containing 2 x 56·7gm. sticks and the general instructions for preparation and usage are the same.
The two sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25ºC) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes.  After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set. (it is advisable to wear eye protection during this process). Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive and should not be used where a paste, mucilage or thin glue is indicated. Milliput will set under water and is heat resistant up to 130°C.
Shelf Life: Store Milliput in cool, dry conditions. Please reseal bags after use. Stored correctly this product should remain workable for about 2 years.
For the restoration of terracotta and other ceramics. Also for the repair of garden urns, pots, Statuettes and damaged brickwork, etc. Also for sculpting and modelling.
Pack contains four ounces of putty.  Putty is the terracotta variety.
•Company: Milliput
•Line/Series: Milliput
•Stock Number: MILTERRA
•Contents: Four (4) ounces
•Sculptor: N/A
•Scale: N/A
•Material: Epoxy putty
•Condition: New
This is a hobby product and not a toy. Recommended for ages 15 and up.
Thanks for viewing.